Skip to main content

Furnace Replacement • Calhoun, GA

Furnace Replacement & Installation in Calhoun, GA

We repair first, and we'll never invent a problem to sell a furnace. When the measurements say a repair won't last or won't pay off, we size the new furnace to your home and your ductwork, not to the old one. Estimates and second opinions on a new system are free. Serving Calhoun and Gordon County from our Calhoun headquarters.

Written by the team at Anderson Heating, Air & Insulation, serving Calhoun since 1978

New gas package HVAC unit set on a concrete pad with fresh mulch beside a home

The Short Answer

Most furnace problems in Calhoun are a low-cost repair, so a replacement should start with a real diagnosis. A new furnace makes sense when the heat exchanger is cracked, when a major part fails on a badly mismatched system, or when the measurements say a repair won't last or won't pay off. Then the job is sizing: a furnace that's too big satisfies the thermostat too fast and short-cycles. Anderson sizes from a Manual J load calculation, measures your ductwork and airflow, and treats your home as one system.

Repair First

Should you repair or replace your furnace?

It depends on the numbers, not the calendar. A 12-year-old furnace with a bad ignitor is a cheap repair; one with a cracked heat exchanger or failed gas valve on a badly mismatched system may be better replaced. We repair first and replace only when the measurements say a repair won't last or won't pay off, and we show you the measurements and math behind any replace recommendation.

The heat exchanger is where safety comes first, because a crack can let combustion gases mix with the air you breathe. We inspect the heat exchanger and check combustion as part of any furnace diagnosis. If we find a real crack, we'll tell you plainly and we won't let the furnace keep running unsafely. And just as importantly: we will never invent a cracked heat exchanger to sell you a furnace. Because we measure, we can show you exactly what we found.

Our Process

How Anderson sizes and installs a furnace

  • Manual J load calculation. We calculate what your home actually needs (square footage, insulation, windows, air leakage, ceiling height) instead of defaulting to the same size as before. An oversized furnace satisfies the thermostat too fast and short-cycles, which wastes energy and leaves rooms unevenly comfortable.
  • We measure the building. We run a blower door to see how much outside air leaks in and a duct blaster to see how much conditioned air leaks out. That tells us whether the ducts need sealing or resizing before the new furnace goes in.
  • Ductwork that fits the equipment. Our in-house sheet metal shop and fabricators at 519 Pine Street create custom duct transitions, plenums and adapters, so your project doesn't wait on an outside shop.
  • A commissioning process. We confirm the new system is operating to spec, with duct static pressure and airflow checked before we call it done.

Your Options

Gas furnace, heat pump or dual fuel?

The right answer depends on your home, your fuel options and your ductwork. A workhorse two-stage gas furnace and matched condenser is the right answer for some homes. North Georgia winters are also within a properly sized heat pump's range, and some homes pair a heat pump with a gas furnace for the coldest days. We tell you which fits, not which has the biggest spiff.

See heat pump installation in Calhoun or our guide to heat pumps versus furnaces in Georgia.

The Anderson Difference

Why Anderson measures instead of guessing

Anderson is a building-science company serving Calhoun since 1978. We run six blower doors and six duct blasters and treat your home as one system. A warm house is a combination of a healthy furnace and a tight, well-insulated home, and we look at both. In most homes, sealing air leaks and adding insulation first makes a new system work better, and it can mean a smaller, less expensive system.

Simple. Clear. No Pressure.

From One Call to Comfort Again

You'll know what's happening, what your options are and what it costs before you decide.

  1. Tell Us What's Going On

    Call or request service, and we'll find the earliest appointment that works for you.

  2. We Diagnose the Problem

    A technician inspects your system and explains what they find in plain language.

  3. See Your Options

    Repair, replace or a whole-home fix when it makes sense, with the price before work begins.

  4. You Decide

    You choose what's right for your home and budget. No pressure.

Simple process. Clear answers. You decide when to proceed.

Reviews

What Anderson Customers Say

4.8 stars on Google. 670+ Google reviews for Anderson.

  • Google review

    ★★★★★

    “Trevor Jones to the rescue once again! He was able to diagnose and repair our 27-year-old unit last December and was able to fix a different issue with the unit today. He is always prompt, knowledg...”
    Anita Celeste Parker
  • Google review

    ★★★★★

    “They came into the house and introduced their selves and explain to me everything that they were going to do. As they were going through the process of fixing the heat and the air they explained to...”
    santesha battle
  • Google review

    ★★★★★

    “I recently had the pleasure of experiencing exceptional service from Josh, Joe, and Eddie. From the moment they arrived, their professionalism and dedication were evident...”
    Tamara Garwood
    Rome, GA

Read more reviews

FAQ

Furnace Replacement Questions

How do I know if my furnace needs to be replaced?

Start with a diagnosis, because most furnace problems are a low-cost repair. A 12-year-old furnace with a bad ignitor is a cheap repair; one with a cracked heat exchanger or failed gas valve on a badly mismatched system may be better replaced. We repair first and show you the measurements and math behind any replace recommendation.

How much does a new furnace cost in Calhoun?

Cost depends on the equipment, capacity, efficiency rating, brand, and what the existing ductwork and electrical can support. Estimates are free, and we walk the whole house (attic, crawlspace, ductwork) before quoting. Call (706) 629-0749 and we'll set up a walk-through.

Are estimates and second opinions free on a new furnace?

Yes. Estimates on a new or replacement system are free, and so are second opinions on new equipment. If another company has quoted you a new system, call (706) 629-0749 and we'll walk the house before you decide. Repair visits start with an $89 diagnostic fee, waived when you choose a repair or install option.

How long does a furnace replacement take?

Most full-system replacements wrap in one day. Installs that include ductwork modifications take longer, and because our sheet metal shop is right at our Calhoun headquarters, that ductwork gets fabricated quickly. A new system is a planned install: when equipment is in stock, the install often follows the assessment within a few business days.

Is a furnace or a heat pump better for a Calhoun home?

It depends on your home, your fuel options and your ductwork. North Georgia winters are within a properly sized heat pump's range, and some homes pair a heat pump with a gas furnace for the coldest days. We look at the whole house before recommending either.

Heat pump installation in Calhoun

Why does furnace size matter?

A furnace that's too big for the home satisfies the thermostat in minutes and shuts off, again and again. That short-cycling wastes energy, shortens the life of the furnace and leaves rooms unevenly comfortable. We size from a Manual J load calculation and measure the ductwork, because leaky or undersized ducts can make a working system seem weak.

Why does my furnace short-cycle?

What warranty comes with a new furnace?

Major HVAC manufacturers typically cover heat exchangers for 10 years and parts for 5 to 10 years when the system is properly installed and registered. Our installation workmanship is covered separately. Ask for the written terms that apply to your proposal.

Ready for a More Comfortable Home?

Get Furnace Replacement Help From a Local Team

Call our Calhoun office or send a request, and a real person will get back to you.

Takes less than 30 seconds!

Request Service

Tell us what's going on and we'll take care of the rest.

Free estimates on new systems and attic insulation. Repair visits start with an $89 diagnostic fee, waived when you choose a repair or install option.

Your information is secure and never shared.

Questions about your request? Call (706) 629-0749.

Call (706) 629-0749 Request Service